How To Turn A Dresser Into A Bathroom Vanity

Select a dresser or buffet suited to space available in bathroom. Most dressers are about 18 to 20 inches deep which is why this is the piece most often converted to a bathroom vanity. Make sure to measure the true cabinet and not just the top piece of wood this dresser had an overhang of more than 1 inch so i measured inside of the dresser top by removing the top drawer to get the measurement for the sink.

how to polish bathroom tiles how much to get a bathroom fitted how to tile the bathroom how to smoke in your bathroom without it smelling how to choose a bathroom faucet hidden bathroom how to remove large mirror from bathroom wall how to remove mould from bathroom walls

My dresser was handed down from my grandma and it was bright yellow.

How to turn a dresser into a bathroom vanity. A dresser buffet or sideboard look for a model that s close to the height of a store bought vanity typically 34 inches with the countertop drop in sink s a faucet table saw or circular saw jigsaw drill and drill bits clamps wood glue. Screw the brace to the dresser frame and install the remaining braces. Add wood cleats to interior side of false fronts.

Double check there are no holes for water to leak through at tile and wood edges and seams. Turn a vintage dresser into a bathroom vanity. In practice any furniture piece that is 18 to 24 inches deep can work well as a bathroom vanity.

The final cost is around the same as a ready made vanity but you re left with this brilliant one of a kind piece says chris. Purchase the sink first fit to the dresser top measurements. Remove the sides and backs of the top two drawers to create false drawer fronts.

Below six things to know before you decide to diy. Secure the face with 1 inch wood screws. Claudia scored the six drawer storage unit on sale for 300 then the couple converted it into a bathroom fixture for another 700 for one day s worth of labor the sinks and plumbing fixtures.

Piece should be very sturdy and preferably solid wood to. If your bathroom doesn t have walls on both end of the vanity than this will be fairly easy if it. Steps to make a dresser into a vanity 1.

Drive screws into vanity through wood cleats from the inside of the vanity. Mark cut line for sink. The standard height for a bathroom vanity is 32 to 34 inches measured from the floor to the top surface of the countertop.

Select dresser and sink. Step two make it pretty. Starting with the top drawer front attach false front to vanity.

Tack the brace to the frame and drill a pilot hole through the brace and into the face of the drawer. Here s how to convert a favorite furnishing into a stand for the bathroom sink. How to turn a dresser into a bathroom vanity.

Cut drawer bottom and side. Place sink into the hole use clear adhesive to put it in place then seal it with bathroom caulk. Put the vanity in place and hook up the faucet or call a plumber.

Hold the face of the upper drawer in place on the dresser and position a brace in the corner where it meets the dresser frame. Step one find a dresser that is the right size.

Source : pinterest.com