Change Bathroom Vanity
The only required tools are a power miter saw level circular saw and belt sander.
Change bathroom vanity. Place the vanity cabinet into position. Attach any fasteners supplied with the top. Reset the vanity top being careful to adjust its position accurately before setting it down.
Use a bucket to catch any water that drips from the supply. Confirm that the cabinet is level both side to side and front to back. Now push wall plugs into the holes trim them to length with a knife and drive screws through the cabinet into the wall.
Check the vanity is level then use your hammer drill to put two screw holes through the back rail of the cabinet and into the wall. Most carpenters or diy homeowners with basic carpentry skills can easily remove and replace a vanity. A high arc faucet with lever handles creates a sleek look while two knobs on the previously bare center panel reinforce the vanity s new furniture style look.
The entire piece was washed in a coat of white paint instantly brightening the room. Remove the top and lay a bead of silicone caulk on the top edge of the cabinet and on both sides of each shim. How to replace a bathroom vanity step 1.
Loosen the caulk between the vanity and the wall with a utility knife. Use a level to draw a level line at the marked height. Set and fasten the vanity.
Install the bathroom vanity. New hardware bun feet and doors outfitted with cane webbing dress up the existing vanity. On the sides go all the way down to the.
